Drilling process in Manufacturing

Hole making is one of the most important machining operations in the manufacturing process. Holes serve a variety of functions including but not limited to: fasteners for assembly, weight reduction, ventilation, access to other parts, or simply for aesthetics. Hole making or drilling is used in the production of almost any part conceivable and those that aren't drilled are made with machines that have been drilled. On most workpieces it is vitally important that the hole be drilled precisely in reference to the x, y, z-axes. When possible drilled holes should be located perpendicular to the workpiece surface. This is due to the large length-to-diameter ratio which causes the drill bit to be easily deflected which can cause the hole to be misplaced, or the drill bit to break or fatigue. Because there are so many types of production operations that involve making a variety of holes in countless different materials, there are many methods for hole making.
The most common type of drill is a standard-point twist drill. This type of drill is versatile and can be used on a variety of materials such as wood, plastic, masonry, ceramic, and metal. These drill bits have two spiral grooves running the length of the drill. These grooves aid in transporting cutting fluid to the drill tip and in removing the chips from the hole. These types of drill bits are held in chucks or collets on machines that are either hand-held or automated. This type of drilling can often cause burrs at both the entrance and the exit of the hole and parts will often need a subsequent deburring operation to smooth out the holes.